TNC-JW Kingsignal Technology

High speed transmission: External High-speed Cable; Active Optical Cable; Transceiver; MPO jumper; External Cable; Internal High-speed Cable; High Current Cable & Connector

PCB: Circuit Board; PCB Division Website

Consumer electronics: Kingsignal Wi-Fi Mesh; KS-TWS Wireless Bluetooth headset; Docking station

TNC

N
TNC
BMA
SMA
SMK
APC3.5
SMC
SAA
SSMA
SMP
7/16 Din
4.3-10

<Upper layer

TNC

TNC-JW More Products

Home > PRODUCTS > RF transmission > RF Connector

TNC RF coaxial connectors are a type of connectors similar to BNC connectors designed according to the standards of MIL-C-39012 and IEC60169-17. They are with thread connection to meet the high anti-knock requirements of applied products, which is different from BNC connectors. Those connectors with an impedance of 50Ω can be used for the broadband from DC to 11GHz while those with an impedance of 75Ω from DC to 1GHz. These products are characterized by high connecting reliability and anti-shock performance and are used to connect RF coaxial cables in radio equipment and instruments, esp. suitable for mobile communication equipment under a high vibration load.

Primary Technical Characteristics

Elecreical Performance			Material and Mechanical Performance
Characteristic Impedance	50Ω		Center Contact	Pin	Brass	Gold Plating
Frequency Range	DC~11GHz		Center Contact	Socket	Beryllium Copper	Gold Plating
Rated Voltage	500V rms		Body and Other Metal Parts		Brass/Stainless Steel	Nickel Plating / Passivation
Dielectric Strength Voltage	1500V rms		Elastic Part		Beryllium Copper	Nickel Plating / Passivation
VSWR	≤1.3		Insulator		PTFE
Contact Resistance	≤2.0mΩ	Center Contact	Seal Ring		Silicon Rubber
Contact Resistance	≤1.0mΩ	Outer Contact	Temperature Range		-65℃ ~+165℃
Insulation Resistance	≥5000MΩ		Durability		500 times
Insertion Loss	≤0.05√f(GHz)dB