Stock Code:300252.SZ

The relationship between current and resistance of electrical connector

author:kingsignal time:2017/08/11

The main role of the electrical connector is to be blocked or isolated between the different circuits to do communication between the bridge to ensure that the current or signal transmission smooth, is an indispensable part of electronic equipment. Along the current smooth flow of observation, you will find one or more, depending on the form and structure can be divided into a variety of different parts of our side can be seen everywhere, such as: U disk interface, hard drive, car Control equipment and so on. Regardless of which industry is used, the most important function of the electrical connector is to ensure that the current is smooth and continuous and reliable, so its main feature is the connection and conduction.


Metal transmission function is a large number of materials can not go beyond, so its use status has been unable to shake, but the use of resistance problems exist, the resistance is the physical resistance of the conductor that the size of the role of resistance, the greater the conductor resistance, The greater the effect of the obstruction. Want to ensure that the electrical connector connection and conduction characteristics, must pay attention to resistance problems, which is its electrical function can not be ignored an important electrical indicators.


Electrical resistance has a lot of classification, the most important for the electrical connector should be the electrical strength, the need to carry the signal to complete the wave, the use of electricity in the conductor in the transport capacity, but if the current transmission in the process of interference or operation Poor words, the signal will be a mistake and loss of the situation. It is necessary to solve the interference situation is the most effective way to install the docking device in the connector docking device, the device has the role of anti-electromagnetic interference The Use a shield device to load a range of frequencies into the electrical connector. Determine whether the electrical connector is qualified by the frequency in the transmission, through the connector after the attenuation to determine.


The resistance value is not only related to the material, but also to the cross-sectional area, so the size of the cross-section of the different metals is different, the resistance value of each metal is not the same, which is the important internal cause of the transmission delay problem, so the specific electrical Connector wants to have good electrical function, in the design and selection also need to be careful.


With the signal type is increasing, increasingly competitive, want their own product performance by the market to accept, in addition to consider the above factors, but also the electrical function of the connector has a comprehensive test, which is the future of many manufacturers must develop The important direction.


The above is the electrical connector on the relationship between current and resistance of a brief introduction to learn more about the contents of the electrical connector, please pay attention to kingsignal official website

  1. Previous:Power cable characteristics and manufacturing requirements
  2. Next:What are the causes of optical cable life?
Domestic Business: 0755-26016250
Overseas Business: 0086-755-86319150-1865