Stock Code:300252.SZ
English

How does the electrical connector be wired

author:kingsignal time:2017/07/17

The electrical connector is usually composed of plugs and sockets, which are connected and disconnected by plugs, sockets and splices and separations. How does the electrical connector wiring This is a matter of concern to people. The following Xiaobian for your details on the aerospace plug wiring problem:

 

Electrical connector can also be called plug seat, widely used in a variety of electrical lines, plays a connection or disconnect the role of the circuit. The correct choice of electrical connector is also an important aspect of improving the reliability of the electrical connector.

 

On the circular electrical connector, the main thread connection, bayonet connection and marbles connected in three ways. One of the most common thread connection, it has a simple processing technology, low manufacturing costs, wide range of applications, but the connection is slow not suitable for frequent plug and fast connection and the occasion.

 

How to connect the electrical connector

 

1. There is a semi-circular splint with a fixed lead on the rear of the plug. There are two small screw buckles on the rear of the plug.

 

2. Remove the splint, with a small nail inserted into the socket at the same time counterclockwise rotation sleeve on the plug in the cap, you can plug the core and the line from the front out to repair or wiring.

 

The above is a brief introduction to the electrical connector wiring problem, learn more about the electrical connector content, please pay attention to kingsignal official website.

  1. Previous:Indian Ocean METISS submarine optical cable system to build, cost 75 million euros
  2. Next:The advantages of protecting the PE power cable pipe
BACK