The electrical connectors are a motor system that provides a detachable interface for connecting two secondary electronic systems and does not produce an unacceptable effect on the operation of the system.

1. the function of the electrical connectors

Electrical connectors are used in electrical products, as the name suggests. It is a key technology that plays a connection with electronic components that are part of a multimodal or assembled product and is covered with metal sheets, surface plating, precision machining and plastic molding. As the electronic signal transmission and connection, if the problems with electrical connectors, will lead to electronic components or even the entire equipment failure. The entire connector, including the terminal and plastic two main parts, the terminal part of the material in addition to the selection, plating and die Affect the quality of the product, of course, the plastic part of the same reason.

2. the structure of the electrical connectors

(1) contact pieces

The contact is the core part of the connector that performs the electrical connection function. Generally by the positive contact and the negative contact with the composition of the contact, through the yin and yang contact to complete the electrical connection.

(2) insulator

Insulators are also often referred to as pedestals or mounting plates, and their function is to align the contacts in the desired position and spacing and to ensure the insulation between the contacts and between the contacts and the enclosure. Good insulation resistance, withstand voltage performance and ease of processing is the choice of insulation materials into the insulator of the basic requirements.

(3) shell

Also known as the housing, is the connector of the cover, which is built-in insulation mounting plate and pin to provide mechanical protection, and provide plug and socket when the alignment, and then the connector fixed to the device.

(4) Annex

Accessories Attachments and installation accessories. Structural accessories such as the collar, positioning keys, positioning pins, guide pins, connecting rings, cable clamps, seals, gaskets and so on. Installation accessories such as screws, nuts, screws, coils and so on. Accessories are mostly standard parts and common parts.

The above is a brief introduction to the structure and function of electrical connectors. To learn more about electrical connectors, please visit kingsignal's official website.