Stock Code:300252.SZ
English

The advantages and disadvantages of the three termination methods of electrical connector

author:kingsignal time:2017/07/28

Electrical connector to crimp installation is generally installed in a small current, this installation has a fast, less investment, high efficiency, to achieve the characteristics of automated production. Used in a connection with a wire-based, to achieve rapid mass production, but also to ensure airtight connection. The most used is the line-to-line connector, wire-to-board connector connection, and very practical, so many home appliances, high current products are using this installation. However, this installation is a disadvantage, that is, reliability is not high, the use of a lot of additional equipment. With the development of technology, and now the board-to-board connector is also used crimping way.

 

Used in high current is SMT and welding. SMT is also a kind of welding, but this is the components sold to the PCB, but the pad is relatively small, so the size of the aviation connector is relatively small, the production process is simplified, according to customer requirements to reduce product size The This installation method has the advantages of high reliability, high efficiency, can realize the advantages of automatic production, but the equipment investment is large, and the structural tension is relatively poor.

 

Welding is the welding between the welding wire and the contact between the welding equipment in this way less, high reliability, but the disadvantage is that can not achieve automated production, the efficiency is relatively low and the quality can not be a good guarantee, or even Weld Situation, so now there are very few companies have used.

 

The above is a brief description of the advantages and disadvantages of the electrical connector termination, to learn more about the contents of the electrical connector, please pay attention to kingsignal official website.