Stock Code:300252.SZ
English

What are the precautions for the packaging, transportation and storage of power cables?

author:kingsignal time:2017/05/26

In the use of power cables in the process, often related to the power cable packaging, transportation, custody of the problem, the following to tell you about the power cable packaging, transportation, storage precautions.

 

1. Cable packaging requires the use of cable tray, iron plate, wooden plate and iron frame wood plate, disk diameter on the transport, storage costs greater impact on the 10kV and below the cable diameter of 3.2 meters below Should, disk width to not more than 2.2 meters as well, for more than 3.5 meters to use a special transport vehicle.

 

2. The weight of each cable and cable specifications and length of the model, the general medium and low voltage cable single disk length of 500 meters, the weight of 3-10 tons.

 

3. The cable and cable tray should not be damaged during transport and handling. Do not push the cable tray directly from the car. The cable tray should not be transported flat and flat.

 

4. Before transporting or rolling the cable tray, make sure that the cable tray is secure and the cable is tight. When rolling, you must follow the arrow on the cable tray or the direction of the cable.

 

5. Cable in the transport, custody of the head should be protected, reliable seal, to prevent moisture into the water. When the visual inspection is in doubt, it should be judged or tested. Damage to the head in the custody should be dealt with immediately.

 

6. Cable storage should be centralized storage, and should indicate the model, voltage, size, length. There should be a channel between the cables. Foundation should be solid, when subject to conditions, the plate should be padded, the storage may not be water. When the cable tray is damaged, it should be replaced.

 

7. Oil-filled cable in the transport, storage should be maintained pressure tank, tubing, valves and pressure gauge intact. Storage should always check the oil pressure, and for recording, oil pressure shall not be reduced to a minimum. When the oil pressure drops to zero or a vacuum occurs, it should be treated in time.

 

The above is the power cable packaging, transportation, custody of the notes related to the introduction, learn more about the power cable content, please pay attention to kingsignal official website.

  1. Previous:What are the factors that affect the insulation of power cables?
  2. Next:The basic structure of power cables
BACK