We all know that weak, security, monitoring, integrated wiring and other projects is very complex, so in the complex will inevitably occur in the wrong situation, so we should be as much as possible to avoid predicting it. However, it is relatively easy to minimize the failure and failure of the integrated wiring project. Here we comprehensive understanding of the weak, security, monitoring optical cable line failure of the latest reasons.

1.The impact of lightning

Optical cable armor components are metal conductors, if the power line to produce short circuit conditions or lightning hit the metal parts, it will produce a strong current damage optical cable line equipment, serious even when the staff casualties.

2.optical cable The insulation of the line is poor

Communication optical cable line if not done insulation work, then the joint box after the water or in the case of moisture will be due to stress corrosion and static fatigue and other reasons to significantly reduce the operation of the optical cable strength, serious when there will be optical cable The situation of the break.

3. The impact of external forces

Line failure in many cases is affected by the impact of external forces. Because many communication optical cable lines are laid in the field, the general laying standards are in the depth of the formation below, so can not effectively avoid a lot of external factors on the optical cable line damage.

4. Fault at line connector

Where the line connector is the most prone to failure, because the fiber at the junction of the original optical cable structure has no protection or protection has been significantly weakened, so the daily operation of the protection work can only rely on the joint box, which The probability of occurrence of the failure caused by greatly increased.

The above is a brief introduction to the latest causes of optical cable line failures. To learn more about the contents of the optical cable, please follow the kingsignal website.